English  |
| Quantity: | |
|---|---|
DA5004D
Sanway
NON
Overview:
1. DA5004D 3600W class d pa audio power is a new generation of Sanway DSP power amplifier.
2. Integrates compact class D design circuit, efficient cooling system and 4in&4out digital processor.
3. DA5004D class pa amplifier delivers 4x900W into 4 ohms for reliable power and performance up to 1U.
4.Inside the compact enclosure, the DSP equipment engine is equipped with crossovers, parametric EQ filters, limiting and alignment delays, which eliminates the need for an outboard speaker processor.
5.20 factory preset configurations enable users to easily modify and store presets
Features:
4x500W at 8 ohms; 4x900W at 4 ohms
class d amplification with built-in DSP
High efficiency and compact and lightweight
Fans cooling and output protection
Specification:
DSP | |
MODEL: | DA5004D DSP audio power amplifier |
Input: | 4 channel |
Output: | 4 channel |
PC Com Port: | 1 USB Com Port on front panel, 1 USB Com Port,2 RS485 Com Port on back panel (RJ-45) |
Processor: | 48KHz Sampling frequency, 48-bit Fixed-Point DSP, 24-bit A/D and D/A converter |
Dynamic range: | >110dB |
Frequency Response: | ±0.25dB, 20Hz --- 20KHz |
Distortion: | < 0.01%, 20Hz - 20KHz @ +10dBu balanced input |
Signal to noise ratio: | >110dB |
crossover filter: | Each output channel can be independently set as LPF and HPF The parameters can be adjusted, Filter type:Butterworth, Bessel, Linkwitz-Riley; The Crossover Frequency:20Hz---20KHz, Slope:12,18,24 or 48 dB/octave |
EQ: | Bandwidth:0.2 to 36 oct, Frequency:20Hz to 20KHz, Gain: -24dB to +12dB, step:0.2 dB |
Delay: | 0ms to 115ms |
Display: | 2 x 20 LCD |
Store Settings: | 20 user program dynamic storage |
AMPLIFIER | |
Model | DA5004D |
Output Power | |
8Ω Stereo Power | 4×500W |
4Ω Stereo Power | 4×800W |
8Ω Bridged Monon Power | 2×1500W |
Frequenty Response | 20Hz-20kHz ±0.5dB |
THD+N(Rated power,4Ω/KHz)% | 0.10% |
Signal Noise Ration(dB) | 110dB |
Input Impedance | 20KΩ Balanced / 10kΩ Unbalanced |
Output Connectors | Speakon Connectors(NEUTRIK) |
Power Requirement | 100-120V-50-60Hz or 200-240V-50-60Hz |
Dimension | 483×44×325mm |
Net weight | 5.8kg |
Overview:
1. DA5004D 3600W class d pa audio power is a new generation of Sanway DSP power amplifier.
2. Integrates compact class D design circuit, efficient cooling system and 4in&4out digital processor.
3. DA5004D class pa amplifier delivers 4x900W into 4 ohms for reliable power and performance up to 1U.
4.Inside the compact enclosure, the DSP equipment engine is equipped with crossovers, parametric EQ filters, limiting and alignment delays, which eliminates the need for an outboard speaker processor.
5.20 factory preset configurations enable users to easily modify and store presets
Features:
4x500W at 8 ohms; 4x900W at 4 ohms
class d amplification with built-in DSP
High efficiency and compact and lightweight
Fans cooling and output protection
Specification:
DSP | |
MODEL: | DA5004D DSP audio power amplifier |
Input: | 4 channel |
Output: | 4 channel |
PC Com Port: | 1 USB Com Port on front panel, 1 USB Com Port,2 RS485 Com Port on back panel (RJ-45) |
Processor: | 48KHz Sampling frequency, 48-bit Fixed-Point DSP, 24-bit A/D and D/A converter |
Dynamic range: | >110dB |
Frequency Response: | ±0.25dB, 20Hz --- 20KHz |
Distortion: | < 0.01%, 20Hz - 20KHz @ +10dBu balanced input |
Signal to noise ratio: | >110dB |
crossover filter: | Each output channel can be independently set as LPF and HPF The parameters can be adjusted, Filter type:Butterworth, Bessel, Linkwitz-Riley; The Crossover Frequency:20Hz---20KHz, Slope:12,18,24 or 48 dB/octave |
EQ: | Bandwidth:0.2 to 36 oct, Frequency:20Hz to 20KHz, Gain: -24dB to +12dB, step:0.2 dB |
Delay: | 0ms to 115ms |
Display: | 2 x 20 LCD |
Store Settings: | 20 user program dynamic storage |
AMPLIFIER | |
Model | DA5004D |
Output Power | |
8Ω Stereo Power | 4×500W |
4Ω Stereo Power | 4×800W |
8Ω Bridged Monon Power | 2×1500W |
Frequenty Response | 20Hz-20kHz ±0.5dB |
THD+N(Rated power,4Ω/KHz)% | 0.10% |
Signal Noise Ration(dB) | 110dB |
Input Impedance | 20KΩ Balanced / 10kΩ Unbalanced |
Output Connectors | Speakon Connectors(NEUTRIK) |
Power Requirement | 100-120V-50-60Hz or 200-240V-50-60Hz |
Dimension | 483×44×325mm |
Net weight | 5.8kg |
