You are here: Home » Products » Class-D Powered Module » D2 Series » D2S 2CH 900W DSP Built-in Amplifier Module Class D
Share to:

D2S 2CH 900W DSP Built-in Amplifier Module Class D

1. D2 active module with DSP function
2. Lightweight and easy install
3. Various model for different speaker
4. High efficient cooling system

  • D2S
  • Sanway


D2 series powered speaker module consists of class D amplifier board; switching power supply and DSP module, have eight model: D2L; D2L-SUB8; D2L-SUB4; D2L-TWO and D2S; D2S-SUB8; D2S-SUB4; D2S-TWO.
The only difference between D2L and D2S is installation dimension
D2L-SUB8 and D2S-SUB8 is only for 8 ohms load, RMS1600W.
D2L-SUB4 and D2S-SUB 4 can load 8ohms and 4 ohms, it is RMS900W at 8ohms load; it is RMS1800W at 4 ohms load
The D2L-TWO and D2S-TWO module can power another bi-amped speaker

D2 Series Feature

1>. High Output Power: Max RMS1800W;
2>. Light Weight: D2S is only 3.8KG; D2L is only 3.6KG
3>. Compact Installation Dimension for all kinds of cabinet box: 
The installation dimension of D2L module ( L*W*D ) is 312*190*90mm
The installation dimension of D2S model ( L*W*D ) is 312*140*126mm
4>. D2 series module has two version operation voltage:
   The 110V version can operate from 90V to 135V voltage range; 
   The 220V version can operate from 180V to 265V voltage range
5>. Each model of D2 series module is mounted an agile DSP module for versatile PA Systems Performance, you could manage this PA system via PC which connected with a USB or RS-485 cable



 Output Power
 8Ω Stereo Power 2×500W     2×500W
 4Ω Stereo Power 2×900W     2×900W
 8Ω Bridged Power   1*1600w ONLY 1*900W  
 4Ω Bridged Power     1*1800w  
Frequency Response 20Hz-20KHz ±1dB
THD+N 1KHz 1W 8Ω <0.1%
Signal to Noise Ratio  1KHz >109dB
Channel Separation  1KHz >70dB
Class  D
Protection Short,DCP,OVP,UVP,OCP,OTP
Operating Voltage 110V version: 90V-135V / 220V version: 180V-265V
Input Sensitivity 0.77V
Input Impedance 20KΩ
DSP Fuction MUTE, Polarity, Gain, Delay,
Limiter, EQ, X-Over
DSP Control USB and RS-485
Dimensions(W×H×D) mm 312*140*125
Packing Dimension (mm) 350*170*160
Net Weight(kg)  3.6
Gross Weight(kg)  4.6

D2S installation dimension


 : JinLe industrial Park, Pingbu Avenue, HuaDu District 510800, Guangzhou China
 : 
+86-20-2297-2520(Working time) 

      +86 13826042826
 : +86 13826042826
 :


  Copyright   2016 Sanway Professional Audio Equipment Co., Ltd All rights reserved.    Supported by Leadong