English  |
| Quantity: | |
|---|---|
D2800
Sanway
Dual 8 inch Line Array
Description
Sanway has announced the launch of this new D2000 Series Class D amplifier modules in 2016 -- D2450 , D2650 and D2800 2CH plate amplifier with DSP function for Active Loudspeakers . This new series is based on the D1 Series single channel amplifier module , as we put 2 pieces amplifier board together to make it 2 channels while the D1 Series is only 1 piece . With the same technique , the output power at 4ohms load is not double of the 8ohms load , the limited power is for safer operation.
Features
1>. 2 channel Class D powered module;
2>. Compact Installation Dimension for all kinds of cabinet box;
3>. Each model is mounted an agile DSP module for versatile PA Systems Performance, you could manage this PA system via PC which connected with a USB or RS-485 cable
4>. There are two version operation voltage :
The 110 version can operate from 90V to 135V voltage range;
The 220V version can operate from 180V to 265V voltage range
Specification
ITEM/MODLE | D2800 |
Output Power | |
8Ω Stereo Power | 2×800W |
4Ω Stereo Power | 2×850W |
Frequency Response | 20Hz-20KHz ±1dB |
THD+N 1KHz 1W 8Ω | <0.1% |
Signal to Noise Ratio 1KHz | >100dB |
Channel Separation 1KHz | >80dB |
Class | D |
Protection | Short, DCP, OVP, UVP, OCP, OTP |
Operating Voltage | 110V version: 90V-135V / 220V version: 180V-265V |
Input Sensitivity | 0.77V |
Input Impedance | 20KΩ |
DSP Fuction | MUTE, Polarity, Gain, Delay, |
DSP Control | USB and RS-485 |
Dimensions(W×H×D) mm | 332*160*100mm |
Packing Dimension (mm) | 370*225*170mm |
Net Weight(kg) | 2.75 |
Gross Weight(kg) | 3.45 |
Description
Sanway has announced the launch of this new D2000 Series Class D amplifier modules in 2016 -- D2450 , D2650 and D2800 2CH plate amplifier with DSP function for Active Loudspeakers . This new series is based on the D1 Series single channel amplifier module , as we put 2 pieces amplifier board together to make it 2 channels while the D1 Series is only 1 piece . With the same technique , the output power at 4ohms load is not double of the 8ohms load , the limited power is for safer operation.
Features
1>. 2 channel Class D powered module;
2>. Compact Installation Dimension for all kinds of cabinet box;
3>. Each model is mounted an agile DSP module for versatile PA Systems Performance, you could manage this PA system via PC which connected with a USB or RS-485 cable
4>. There are two version operation voltage :
The 110 version can operate from 90V to 135V voltage range;
The 220V version can operate from 180V to 265V voltage range
Specification
ITEM/MODLE | D2800 |
Output Power | |
8Ω Stereo Power | 2×800W |
4Ω Stereo Power | 2×850W |
Frequency Response | 20Hz-20KHz ±1dB |
THD+N 1KHz 1W 8Ω | <0.1% |
Signal to Noise Ratio 1KHz | >100dB |
Channel Separation 1KHz | >80dB |
Class | D |
Protection | Short, DCP, OVP, UVP, OCP, OTP |
Operating Voltage | 110V version: 90V-135V / 220V version: 180V-265V |
Input Sensitivity | 0.77V |
Input Impedance | 20KΩ |
DSP Fuction | MUTE, Polarity, Gain, Delay, |
DSP Control | USB and RS-485 |
Dimensions(W×H×D) mm | 332*160*100mm |
Packing Dimension (mm) | 370*225*170mm |
Net Weight(kg) | 2.75 |
Gross Weight(kg) | 3.45 |
D3 series
