Channel: | |
---|---|
class: | |
Quantity: | |
F5500
Sanway
2x1500w
2x2400w
2x3000w
4800w
6000w
<0.05%
<0.01%
>-60db
41.7kg
44.5kg
F5500 1500W Circuit DJ Speaker Amplifier
Applications
1>. Arenas
2>. Convention Centers
3>. Medium or large Ballrooms
4>. Perfect for corporate
5>. Theaters Music
6>. Club or Church
7>. Concert reinforcement
Specification
Frequency Response(+o/-0.3dB,1W/8Ω) | 20Hz-20kHz,-3dB@135kHz |
Power Bandwidth (rated power at 4Ω 1%THD+N) | 20Hz-20kHz, -.1.1dB/+0dB |
TourClass Protection | ACL,IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient,current inrush, sub/ultrasonic input |
THD+N (1kHz 1W ) | <0.05% |
SMPTE IMD (rated power. 60 Hz & 7kHz) | <0.01% |
Damping Factor ( 1KHz) | 248 |
Input CMRR (1kHz) | >-60dB |
Voltage Gain (rated power @ 8Ω) | X40dB |
Input Sensitivity (rated power at 8Ω) | 0.7746V |
Input Impedance (balanced/unbalanced) | 20KΩ/10KΩ |
S/N Ratio ("A"weighted, full power at 4Ω) | 98dB |
Crosstalk ("A"weighted, full power@4Ω) | >-80dB |
Class | 3 Step H |
Input Connectors (per channel) | Female XLR (pin 2+, configurable for pin 3+). TRS (tip+) |
Output Connectors (per channel) | 5-way binding posts or Speakon connectors (market dependent) |
Supply Power | 4858W |
Power Supply (factory configured) | AC220V/230V,50-60Hz |
Cooling | Two side panel variable speed DC fans, better than conventional cooling |
Controls | Front panel: 2 attenuators, power switch; Rear panel: signal ground lift & mode switches. |
LED Indicators (per channel) | Signal, Protect, Active, Critical |
Construction | Steel chassis, 16 gauge . Casting Aluminum front panel. |
F5500 1500W Circuit DJ Speaker Amplifier
Applications
1>. Arenas
2>. Convention Centers
3>. Medium or large Ballrooms
4>. Perfect for corporate
5>. Theaters Music
6>. Club or Church
7>. Concert reinforcement
Specification
Frequency Response(+o/-0.3dB,1W/8Ω) | 20Hz-20kHz,-3dB@135kHz |
Power Bandwidth (rated power at 4Ω 1%THD+N) | 20Hz-20kHz, -.1.1dB/+0dB |
TourClass Protection | ACL,IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient,current inrush, sub/ultrasonic input |
THD+N (1kHz 1W ) | <0.05% |
SMPTE IMD (rated power. 60 Hz & 7kHz) | <0.01% |
Damping Factor ( 1KHz) | 248 |
Input CMRR (1kHz) | >-60dB |
Voltage Gain (rated power @ 8Ω) | X40dB |
Input Sensitivity (rated power at 8Ω) | 0.7746V |
Input Impedance (balanced/unbalanced) | 20KΩ/10KΩ |
S/N Ratio ("A"weighted, full power at 4Ω) | 98dB |
Crosstalk ("A"weighted, full power@4Ω) | >-80dB |
Class | 3 Step H |
Input Connectors (per channel) | Female XLR (pin 2+, configurable for pin 3+). TRS (tip+) |
Output Connectors (per channel) | 5-way binding posts or Speakon connectors (market dependent) |
Supply Power | 4858W |
Power Supply (factory configured) | AC220V/230V,50-60Hz |
Cooling | Two side panel variable speed DC fans, better than conventional cooling |
Controls | Front panel: 2 attenuators, power switch; Rear panel: signal ground lift & mode switches. |
LED Indicators (per channel) | Signal, Protect, Active, Critical |
Construction | Steel chassis, 16 gauge . Casting Aluminum front panel. |
+86 13826042826
: +86 13826042826
: sanway.audio
: sales@china-sanway.com
Copyright 2020 Sanway Professional Audio Equipment Co., Ltd All rights reserved. Supported by Leadong