English  |
| Channel: | |
|---|---|
| class: | |
| Quantity: | |
F4500
Sanway
2x1350w
2x2080w
2x2700w
4160w
5400w
<0.05%
<0.01%
>-60db
37.5kg
40kg
F5500 Class 3 Step H 1350W Circuit Electronic Audio Amplifier
Quick details
8ΩStereo Power(RMS) ----- 2x1350W
4ΩStereo Power(RMS) ----- 2x2080
2ΩStereo Power(RMS) ----- 2x2700W
8Ω Bridged Power(RMS) ---- 4160W
4Ω Bridged Power(RMS) ---- 5400W
Dimensions (HxWxD) ---- 132x483x480mm (3U)
Net Weight ---- 37.5kg
Gross Weight ---- 40kg
Specification
| Frequency Response(+o/-0.3dB,1W/8Ω) | 20Hz-20kHz,-3dB@135kHz |
| Power Bandwidth (rated power at 4Ω 1%THD+N) | 20Hz-20kHz, -.1.1dB/+0dB |
| TourClass Protection | ACL,IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient,current inrush, sub/ultrasonic input |
| THD+N (1kHz 1W ) | <0.05% |
| SMPTE IMD (rated power. 60 Hz & 7kHz) | <0.01% |
| Damping Factor ( 1KHz) | 248 |
| Input CMRR (1kHz) | >-60dB |
| Voltage Gain (rated power @ 8Ω) | X40dB |
| Input Sensitivity (rated power at 8Ω) | 0.7746V |
| Input Impedance (balanced/unbalanced) | 20KΩ/10KΩ |
| S/N Ratio ("A"weighted, full power at 4Ω) | 98dB |
| Crosstalk ("A"weighted, full power@4Ω) | >-80dB |
| Class | 3 Step H |
| Input Connectors (per channel) | Female XLR (pin 2+, configurable for pin 3+). TRS (tip+) |
| Output Connectors (per channel) | 5-way binding posts or Speakon connectors (market dependent) |
| Supply Power | 4858W |
| Power Supply (factory configured) | AC220V/230V,50-60Hz |
| Cooling | Two side panel variable speed DC fans, better than conventional cooling |
| Controls | Front panel: 2 attenuators, power switch; Rear panel: signal ground lift & mode switches. |
| LED Indicators (per channel) | Signal, Protect, Active, Critical |
| Construction | Steel chassis, 16 gauge . Casting Aluminum front panelApplication |
Application
1. Churches, Museums, Sports venues, Conference centres,
2. Theatres, Auditoria, Shopping malls, Transport terminals,
3. Concert halls, Bars, Restaurants, Lecture theatres
F5500 Class 3 Step H 1350W Circuit Electronic Audio Amplifier
Quick details
8ΩStereo Power(RMS) ----- 2x1350W
4ΩStereo Power(RMS) ----- 2x2080
2ΩStereo Power(RMS) ----- 2x2700W
8Ω Bridged Power(RMS) ---- 4160W
4Ω Bridged Power(RMS) ---- 5400W
Dimensions (HxWxD) ---- 132x483x480mm (3U)
Net Weight ---- 37.5kg
Gross Weight ---- 40kg
Specification
| Frequency Response(+o/-0.3dB,1W/8Ω) | 20Hz-20kHz,-3dB@135kHz |
| Power Bandwidth (rated power at 4Ω 1%THD+N) | 20Hz-20kHz, -.1.1dB/+0dB |
| TourClass Protection | ACL,IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient,current inrush, sub/ultrasonic input |
| THD+N (1kHz 1W ) | <0.05% |
| SMPTE IMD (rated power. 60 Hz & 7kHz) | <0.01% |
| Damping Factor ( 1KHz) | 248 |
| Input CMRR (1kHz) | >-60dB |
| Voltage Gain (rated power @ 8Ω) | X40dB |
| Input Sensitivity (rated power at 8Ω) | 0.7746V |
| Input Impedance (balanced/unbalanced) | 20KΩ/10KΩ |
| S/N Ratio ("A"weighted, full power at 4Ω) | 98dB |
| Crosstalk ("A"weighted, full power@4Ω) | >-80dB |
| Class | 3 Step H |
| Input Connectors (per channel) | Female XLR (pin 2+, configurable for pin 3+). TRS (tip+) |
| Output Connectors (per channel) | 5-way binding posts or Speakon connectors (market dependent) |
| Supply Power | 4858W |
| Power Supply (factory configured) | AC220V/230V,50-60Hz |
| Cooling | Two side panel variable speed DC fans, better than conventional cooling |
| Controls | Front panel: 2 attenuators, power switch; Rear panel: signal ground lift & mode switches. |
| LED Indicators (per channel) | Signal, Protect, Active, Critical |
| Construction | Steel chassis, 16 gauge . Casting Aluminum front panelApplication |
Application
1. Churches, Museums, Sports venues, Conference centres,
2. Theatres, Auditoria, Shopping malls, Transport terminals,
3. Concert halls, Bars, Restaurants, Lecture theatres
