How to choose suitable speakers system in a space with long reverberation time

What should I do if the sound absorption is not good and the reverberation in the room is too strong? What should I do if the decoration cannot move?

 

Choose line array or sound sourch design it depends on the budget

Line array:

 

The advantage of line array speaker is that the long-distance sound is not disintegrated; and the projection angle is very narrow, the sound can be controlled and accurately hit people, rather than buildings, so it can reduce the squeal of high energy-reflected sound. In addition, this refers to the indoor small array system, not for large-scale concerts.

 

Why don't you need to explain? Because to choose an array speaker, you need to look at the size of the original factory's corresponding space (and the vertical and horizontal coverage angles), installation height, and overall budget to determine the type of array you need. Rather than superstitious brands. Or bigger the better...

 

Like  double 12 3 way line array speaker and double 15-inch line array speaker, 3 way line array, there are many speakers, and the energy is too strong (the speakers must be at least 5-10m away from the congregation, otherwise...), and must be controlled by a matching rear stage and exclusive digital control. Pre-level.

 

Indoor economical array, compact size-based active array speakers, suitable for medium-sized venues with a long-distance installation distance of 3-4 meters, such as Sanway Audio's VR10&S30 active line array system are all active, built-in DSP capable of sounding the speaker.

Even in an environment with poor sound absorption, there can be a clear sound. It is easy to install, and it is easy to make a good noise when tuning. With exclusive subwoofer, there is no problem with dynamics a little farther away.

 

Advantages: can support larger dynamics

Disadvantages: larger size (although still smaller than normal speakers)

 

Sound column array: good-looking and easy to hide into the decoration

 

Like Sanway Audio CS series column speakers

CS44 4x4 inch column speakers, and CS64 6x4 inch column speakers, both column speaker can connect together as a long column. Also they can be powered by a active subwoofer CS12

 

Summary of the sound column array:

Advantages: easy to integrate into the decoration, inconspicuous

Disadvantages: Not suitable for high dynamic volume activities

If you don't have enough budget, you could choose point audio source solution

Rely on many traditional small and medium speakers. Sanway Column speaker also can be used in this way.

 

The sound is made at an installation position close to the congregation (2-5 meters). Each horn is responsible for covering a small area (usually 3-5 rows). The sound is absorbed by the horn when it hits the congregation. Treat people as sound absorbers to reduce secondary reflections.

full range speaker

 

Speaker partition installation

Try to install in the center of each responsible area

Unify the sound angle and axis, use a large depression angle to project downward

Try to let the audience hear the direct sound as much as possible, no need to turn up the volume~ You need a low frequency, and you can add a super bass!