English  |
| Quantity: | |
|---|---|
PA360
Sanway
Dual 8 inch Line Array
Overview:
PA360 is a 3in&6out digital processor. With dynamics, EQ, feedback suppression, sub-harmonic synthesis, crossover, polarity, phase, and delay processing, PA360 provide all the processing required for optimizing and protecting Front of House, stage monitor, delay fill, and zone loudspeaker systems.
The PA360 is perfectly suited for applications such as public address, houses of worship, night clubs, outdoor music events,
band rehearsal spaces, theatrical performance venues, touring rigs, or wherever powerful, advanced signal processing, flexibility,
and ease-of-use are required for protecting and optimizing a loudspeaker system.
Features:
high-quality 24-bit A/D and D/A converters
31-Band Graphic EQ
12-Band Parametric EQ (with narrow notch capabilities)
12-Band AutoEQs (8 AutoEQ bands, 4 User bands)
Backline Delay
Noise Gate
Specification:
ANALOG INPUTS | |
Number of Inputs: | 3 analog line inputs/2 AES digital inputs (shared connectors), 1 RTA mic input |
Connectors: | 3 female XLRs (2 selectable between analog/AES digital audio formats), 1 female XLR RTA mic input |
Type: | Electronically balanced/RF filtered |
Impedance: | > 30 kΩ, balanced line to line |
Max Input Level (line inputs): | > +28 dBu, balanced, ≤1% THD |
CMRR: | > 50 dB @ 1 kHz |
RTA Mic Preamp Phantom Power: | +48 VDC |
ANALOG OUTPUTS | |
Number of Outputs: | 6 line outputs |
Connectors: | Male XLR |
Type | Electronically balanced, RF filtered |
Impedance | 120 Ω, balanced line to line |
Max Output Level | +22 dBu, balanced, ≤1% THD |
Alignment Delay | Up to 1000 ms per output channel |
A/D PERFORMANCE | |
A/D Converter | 24-bit with dbx Type IV™ Conversion System |
A/D Dynamic Range: | 117 dB A-weighted, 114 dB unweighted, 22 kHz BW |
Type IV Dynamic Range: | 129 dB with transient material, A-weighted, 22 kHz BW; 126 dB with transient material, unweighted, 22 kHz BW; 121 dB typical with program material, A-weighted, 22 kHz BW |
D/A PERFORMANCE | |
D/A Converter: | 24-bit |
D/A Dynamic Range: | 116 dB A-weighted, 113 dB unweighted, 22 kHz BW |
SYSTEM PERFORMANCE | |
Internal Processing Wordlength: | 32-bit floating point |
SupportedS ample Rates: | 48/96 kHz (32-192 kHz using sample rate conversion) |
Dynamic Range: | 114 dB A-weighted 110 dB unweighted |
THD+Noise: | 0.0025% typical at +4 dBu, 1 kHz, 0 dB input gain |
Frequency Response: | 20 Hz – 20 kHz, +0 /- 0.5 dB |
Interchannel Crosstalk: | < -97 dB, -105 dB typical 20-20 kHz, +4 dBu, all channels measured |
Latency: | Analog input to output: 2.57 ms (48 kHz), 2.28 ms (96 kHz) Digital AES input to output: 2.31 ms (48 kHz), 2.15 ms (96 kHz) |
Operating Temperature: | 0º to 40º C (32º to 104º F) |
BLU LINK AUDIO | |
Connectors: | 2 x RJ-45 Ethernet connectors |
Maximum Nodes: | Up to 60 devices |
Maximum Cable Length: | 100m/328ft on Category 5e or higher cable between devices |
Latency: | 11/Fs [0.23ms@48k, 0.11ms@96k] |
Pass Through Latency: | 4/Fs [0.08ms@48k, 0.04ms@96k] |
DANTE™ AUDIO | |
Connectors: | 2 x RJ-45 connectors |
Maximum Cable Length: | 100m/328ft on Category 5 (100Mbps) or Category 5e/Category 6 (Gigabit) cable between devices |
Latency: | 0.15ms-5.0ms |
POWER SUPPLY | |
Operating Voltage: | 100-240 VAC 50/60 Hz |
Power Consumption: | 30 Watts |
PHYSICAL | |
Unit Weight: | 5.48 lbs. (2.49 kg) |
Shipping Weight | 7.10 lbs. (3.22 kg) |
Dimensions: | 1.75” (H) x 8.0” (D) x 19.0” (W) |
Overview:
PA360 is a 3in&6out digital processor. With dynamics, EQ, feedback suppression, sub-harmonic synthesis, crossover, polarity, phase, and delay processing, PA360 provide all the processing required for optimizing and protecting Front of House, stage monitor, delay fill, and zone loudspeaker systems.
The PA360 is perfectly suited for applications such as public address, houses of worship, night clubs, outdoor music events,
band rehearsal spaces, theatrical performance venues, touring rigs, or wherever powerful, advanced signal processing, flexibility,
and ease-of-use are required for protecting and optimizing a loudspeaker system.
Features:
high-quality 24-bit A/D and D/A converters
31-Band Graphic EQ
12-Band Parametric EQ (with narrow notch capabilities)
12-Band AutoEQs (8 AutoEQ bands, 4 User bands)
Backline Delay
Noise Gate
Specification:
ANALOG INPUTS | |
Number of Inputs: | 3 analog line inputs/2 AES digital inputs (shared connectors), 1 RTA mic input |
Connectors: | 3 female XLRs (2 selectable between analog/AES digital audio formats), 1 female XLR RTA mic input |
Type: | Electronically balanced/RF filtered |
Impedance: | > 30 kΩ, balanced line to line |
Max Input Level (line inputs): | > +28 dBu, balanced, ≤1% THD |
CMRR: | > 50 dB @ 1 kHz |
RTA Mic Preamp Phantom Power: | +48 VDC |
ANALOG OUTPUTS | |
Number of Outputs: | 6 line outputs |
Connectors: | Male XLR |
Type | Electronically balanced, RF filtered |
Impedance | 120 Ω, balanced line to line |
Max Output Level | +22 dBu, balanced, ≤1% THD |
Alignment Delay | Up to 1000 ms per output channel |
A/D PERFORMANCE | |
A/D Converter | 24-bit with dbx Type IV™ Conversion System |
A/D Dynamic Range: | 117 dB A-weighted, 114 dB unweighted, 22 kHz BW |
Type IV Dynamic Range: | 129 dB with transient material, A-weighted, 22 kHz BW; 126 dB with transient material, unweighted, 22 kHz BW; 121 dB typical with program material, A-weighted, 22 kHz BW |
D/A PERFORMANCE | |
D/A Converter: | 24-bit |
D/A Dynamic Range: | 116 dB A-weighted, 113 dB unweighted, 22 kHz BW |
SYSTEM PERFORMANCE | |
Internal Processing Wordlength: | 32-bit floating point |
SupportedS ample Rates: | 48/96 kHz (32-192 kHz using sample rate conversion) |
Dynamic Range: | 114 dB A-weighted 110 dB unweighted |
THD+Noise: | 0.0025% typical at +4 dBu, 1 kHz, 0 dB input gain |
Frequency Response: | 20 Hz – 20 kHz, +0 /- 0.5 dB |
Interchannel Crosstalk: | < -97 dB, -105 dB typical 20-20 kHz, +4 dBu, all channels measured |
Latency: | Analog input to output: 2.57 ms (48 kHz), 2.28 ms (96 kHz) Digital AES input to output: 2.31 ms (48 kHz), 2.15 ms (96 kHz) |
Operating Temperature: | 0º to 40º C (32º to 104º F) |
BLU LINK AUDIO | |
Connectors: | 2 x RJ-45 Ethernet connectors |
Maximum Nodes: | Up to 60 devices |
Maximum Cable Length: | 100m/328ft on Category 5e or higher cable between devices |
Latency: | 11/Fs [0.23ms@48k, 0.11ms@96k] |
Pass Through Latency: | 4/Fs [0.08ms@48k, 0.04ms@96k] |
DANTE™ AUDIO | |
Connectors: | 2 x RJ-45 connectors |
Maximum Cable Length: | 100m/328ft on Category 5 (100Mbps) or Category 5e/Category 6 (Gigabit) cable between devices |
Latency: | 0.15ms-5.0ms |
POWER SUPPLY | |
Operating Voltage: | 100-240 VAC 50/60 Hz |
Power Consumption: | 30 Watts |
PHYSICAL | |
Unit Weight: | 5.48 lbs. (2.49 kg) |
Shipping Weight | 7.10 lbs. (3.22 kg) |
Dimensions: | 1.75” (H) x 8.0” (D) x 19.0” (W) |
