Quantity: | |
---|---|
MG8CX
Sanway
<95dB
Professional Preformence
8
Audio Mixer
21W
specification | |
Total Harmonic Distortion | Less than 0.1 % (THD+N) 20 Hz - 20 kHz @ +14 dBu (ST OUT) |
Frequency Response | 0, +1, -3 dB 20 Hz - 20 kHz @ +4 dBu (ST OUT) |
Hum & Noise | -128 dBu Equivalent Input Noise/ -100 dBu Residual Output Noise 20 Hz - 20 kHz, Rs = 150 Ω , Input Gain = Maximum |
Input Connectors | MIC: 4, LINE: 2 mono + 4 stereo, CH INSERT: 2; RETURN: 1 stereo, 2TR IN: 1 stereo |
Output Connectors | EFFECT SEND: 1, CH INSERT: 2, REC: 1 stereo, MONITOR: 1 stereo, Phone: 1 |
Crosstalk | -70 dB @ 1 kHz |
Phantom Power | + 48 V |
Input HPF | CH 1-2 and CH 3/4-5/6, 80Hz, 12dB/oct |
CH EQ (MONO) ± 15 dB (Max. )High | 10 k Hz: shelving |
CH EQ (MONO) ± 15 dB (Max. )Mid | 2.5 k Hz: peaking |
CH EQ (MONO) ± 15 dB (Max. )Low | 100 Hz: shelving |
CH EQ (STEREO) ± 15 dB (Max. )High | 10 k Hz: shelving |
CH EQ (STEREO) ± 15 dB (Max. )Mid | _ |
CH EQ (STEREO) ± 15 dB (Max. )Low | 100 Hz: shelving |
Compressor (COMP) | Control x 1 (Gain/Threshold/Ratio), CH 1-2 |
Internal Digital Effect | 16 PROGRAM, PARAMETER control Foot Switch (Digital Effect, on/off) |
LED Level Meter / Pre Monitor Level | 2 x 7 points LED meter (PEAK, +6, +3, 0, -5, -10, -20 dB) PEAK lights if the signal comes within 3 dB of the clipping level. |
Peak Indicators | Red LED turns on when post EQ (ST CH: or post Mic HA) signal reaches -3dB below clipping (17dBu). |
Power Supply Adapter | PA-10: AC 38VCT, 0.62A, Cable Length = 3.6m |
Power Consumption | 21 W |
Dimensions (W x H x D) | 256.6 mm x 62.2 mm x 302.5 mm |
Net Weight | 1.6 kg |
specification | |
Total Harmonic Distortion | Less than 0.1 % (THD+N) 20 Hz - 20 kHz @ +14 dBu (ST OUT) |
Frequency Response | 0, +1, -3 dB 20 Hz - 20 kHz @ +4 dBu (ST OUT) |
Hum & Noise | -128 dBu Equivalent Input Noise/ -100 dBu Residual Output Noise 20 Hz - 20 kHz, Rs = 150 Ω , Input Gain = Maximum |
Input Connectors | MIC: 4, LINE: 2 mono + 4 stereo, CH INSERT: 2; RETURN: 1 stereo, 2TR IN: 1 stereo |
Output Connectors | EFFECT SEND: 1, CH INSERT: 2, REC: 1 stereo, MONITOR: 1 stereo, Phone: 1 |
Crosstalk | -70 dB @ 1 kHz |
Phantom Power | + 48 V |
Input HPF | CH 1-2 and CH 3/4-5/6, 80Hz, 12dB/oct |
CH EQ (MONO) ± 15 dB (Max. )High | 10 k Hz: shelving |
CH EQ (MONO) ± 15 dB (Max. )Mid | 2.5 k Hz: peaking |
CH EQ (MONO) ± 15 dB (Max. )Low | 100 Hz: shelving |
CH EQ (STEREO) ± 15 dB (Max. )High | 10 k Hz: shelving |
CH EQ (STEREO) ± 15 dB (Max. )Mid | _ |
CH EQ (STEREO) ± 15 dB (Max. )Low | 100 Hz: shelving |
Compressor (COMP) | Control x 1 (Gain/Threshold/Ratio), CH 1-2 |
Internal Digital Effect | 16 PROGRAM, PARAMETER control Foot Switch (Digital Effect, on/off) |
LED Level Meter / Pre Monitor Level | 2 x 7 points LED meter (PEAK, +6, +3, 0, -5, -10, -20 dB) PEAK lights if the signal comes within 3 dB of the clipping level. |
Peak Indicators | Red LED turns on when post EQ (ST CH: or post Mic HA) signal reaches -3dB below clipping (17dBu). |
Power Supply Adapter | PA-10: AC 38VCT, 0.62A, Cable Length = 3.6m |
Power Consumption | 21 W |
Dimensions (W x H x D) | 256.6 mm x 62.2 mm x 302.5 mm |
Net Weight | 1.6 kg |
+86 13826042826
: +86 13826042826
: sanway.audio
: sales@china-sanway.com
Copyright 2020 Sanway Professional Audio Equipment Co., Ltd All rights reserved. Supported by Leadong