English  |
MG124C/CX
Sanway
Touch Control
Metal
<0.005%
6
| MG124C/CX mixer specification | |
| Total Harmonic Distortion | Less than 0.1 % (THD+N) 20 Hz - 20 kHz @ +14 dBu (ST OUT) |
| Frequency Response | 0, +1, -3 dB 20 Hz - 20 kHz @ +4 dBu (ST OUT) |
| Hum & Noise | -128 dBu Equivalent Input Noise/ -98 dBu Residual Output Noise 20 Hz - 20 kHz, Rs = 150 Ω , Input Gain = Maximum |
| Input Connectors | MIC: 6, LINE: 4 mono + 4 stereo, CH INSERT: 4, AUX RTN: 1 stereo, 2TR IN: 1 |
| Output Connectors | ST: 2, AUX SEND: 1, EFFECT SEND: 1, CH INSERT: 4, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 2 Phone: 1 |
| Crosstalk | -70 dB @ 1 kHz |
| Phantom Power | + 48 V |
| Input HPF | CH 1-4, CH 5/6-7/8, 80Hz, 12dB/oct |
| CH EQ (MONO) ± 15 dB (Max. )High | 10 k Hz: shelving |
| CH EQ (MONO) ± 15 dB (Max. )Mid | 2.5 k Hz: peaking |
| CH EQ (MONO) ± 15 dB (Max. )Low | 100 Hz: shelving |
| CH EQ (STEREO) ± 15 dB (Max. )High | 10 k Hz: shelving |
| CH EQ (STEREO) ± 15 dB (Max. )Mid | _ |
| CH EQ (STEREO) ± 15 dB (Max. )Low | 100 Hz: shelving |
| Compressor (COMP) | Control x 1 (Gain/Threshold/Ratio), CH 1-4 |
| Internal Digital Effect | 16 PROGRAM, PARAMETER control Foot Switch (Digital Effect, on/off) |
| LED Level Meter / Pre Monitor Level | 2 x 12 points LED meter (PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB) PEAK lights if the signal comes within 3 dB of the clipping level. |
| Peak Indicator | Red LED turns on when post EQ (ST CH: or post Mic HA) signal reaches -3dB below clipping (17dBu). |
| Power Supply Adapter | PA-20: AC 35VCT, 0.94A, Cable Length = 3.6m |
| Power Consumption | 30 W |
| Dimensions (W x H x D) | 346.2 mm x 86.1 mm x 436.6 mm |
| Net Weight | 3.2 kg |