English  |
| Quantity: | |
|---|---|
LA12X
Sanway
Overview:
Power Amplifier Units
LA12X 4 channel audio dsp power amplifier is based on a modern, high performance D class topology which provides high efficiency, low heat generation and large output power. At the same time, the high switching frequency of the output stage (450 kHz) provides sound quality comparable with the best analog amplifiers.
Analog inputs
The audio power amplifier is equipped with four balanced analog inputs (XLR female).
The use of balanced inputs provides for an essential reduction of the environment-induced hum and noise interference with long input connecting cables.
For DSP processing, the analog signal is converted to digital using four 24-bit A/D converters, operating at 96 kHz. The dynamic range of A/D and D/A converters is 120 dB.
AES INPUT DOESN'T WORK
ETHERNET connectors
Two equivalent ports for connection to the ETHERNET network.
Provide the ability to configure and remotely control the amplifier over a network, using the NetControl software. The built-in router allows you to connect multiple amplifiers in chain.
Line Outputs
Four XLR connectors (male).
Provide the possibility of parallel connection of several amplifiers, using standard
Specification:
MODEL: | LA12X 12000W 4 Channel Class D Audio DSP Power Amplifier |
Input: | 4 channel |
Output: | 4 channel |
Processor: | DFM Germany |
Dynamic range: | >110dB |
Frequency Response: | ±0.1dB, 20Hz --- 34KHz |
Distortion: | < 0.01%, 20Hz - 20KHz @ +10dBu balanced input |
Signal to noise ratio: | >120dB |
Output Power | |
8Ω Stereo Power | 4×1500W |
4Ω Stereo Power | 4×2800W |
2Ω Stereo Power | 4×3000W |
Input Impedance | 20KΩ Balanced / 10kΩ Unbalanced |
Output Connectors | Speakon Connectors(NEUTRIK) |
Power Requirement | 100-240V-50Hz |
Protection | Short circuit, open circuit, thermal, overload, DC, super audio protection |
Dimension | |
Airframe | 483×459×88mm 18kg |
Overview:
Power Amplifier Units
LA12X 4 channel audio dsp power amplifier is based on a modern, high performance D class topology which provides high efficiency, low heat generation and large output power. At the same time, the high switching frequency of the output stage (450 kHz) provides sound quality comparable with the best analog amplifiers.
Analog inputs
The audio power amplifier is equipped with four balanced analog inputs (XLR female).
The use of balanced inputs provides for an essential reduction of the environment-induced hum and noise interference with long input connecting cables.
For DSP processing, the analog signal is converted to digital using four 24-bit A/D converters, operating at 96 kHz. The dynamic range of A/D and D/A converters is 120 dB.
AES INPUT DOESN'T WORK
ETHERNET connectors
Two equivalent ports for connection to the ETHERNET network.
Provide the ability to configure and remotely control the amplifier over a network, using the NetControl software. The built-in router allows you to connect multiple amplifiers in chain.
Line Outputs
Four XLR connectors (male).
Provide the possibility of parallel connection of several amplifiers, using standard
Specification:
MODEL: | LA12X 12000W 4 Channel Class D Audio DSP Power Amplifier |
Input: | 4 channel |
Output: | 4 channel |
Processor: | DFM Germany |
Dynamic range: | >110dB |
Frequency Response: | ±0.1dB, 20Hz --- 34KHz |
Distortion: | < 0.01%, 20Hz - 20KHz @ +10dBu balanced input |
Signal to noise ratio: | >120dB |
Output Power | |
8Ω Stereo Power | 4×1500W |
4Ω Stereo Power | 4×2800W |
2Ω Stereo Power | 4×3000W |
Input Impedance | 20KΩ Balanced / 10kΩ Unbalanced |
Output Connectors | Speakon Connectors(NEUTRIK) |
Power Requirement | 100-240V-50Hz |
Protection | Short circuit, open circuit, thermal, overload, DC, super audio protection |
Dimension | |
Airframe | 483×459×88mm 18kg |
