Availability: | |
---|---|
DA2504D
Sanway
NON
Overview:
DA2504D 1800W 1U power amplifier a new generation of Sanway DSP power amplifier. It integrated with compact class d design circuit, high efficiency cooling system and 4in&4out digital processor.
Delivering 4x450W at 4 ohms, DA2504D class d amplifier cover reliable power and performance up into 1U. Inside of the compact case, DSP equipment engine equipped with crossover, parametric EQ filters, limiting and alignment delay, it eliminates the need for outboard loudspeaker processors. And 20 factory preset configurations enable user can modify and store the presets conveniently.
Features:
4x250W at 8 ohms; 4x450W at 4 ohms
Digital, class d amplification
High efficiency and compact and lightweight
Fans cooling and output protection
Application:
Home theater
Permanent installations
Portable corporate AV systems
Live PA setups
Specification:
DSP | |
MODEL: | DA2504D |
Input: | 4 channel |
Output: | 4 channel |
PC Com Port: | 1 USB Com Port on front panel, 1 USB Com Port,2 RS485 Com Port on back panel (RJ-45) |
Processor: | 48KHz Sampling frequency, 48-bit Fixed-Point DSP, 24-bit A/D and D/A converter |
Dynamic range: | >110dB |
Frequency Response: | ±0.25dB, 20Hz --- 20KHz |
Distortion: | < 0.01%, 20Hz - 20KHz @ +10dBu balanced input |
Signal to noise ratio: | >110dB |
crossover filter: | Each output channel can be independently set as LPF and HPF The parameters can be adjusted, Filter type:Butterworth, Bessel, Linkwitz-Riley; The Crossover Frequency:20Hz---20KHz, Slope:12,18,24 or 48 dB/octave |
EQ: | Bandwidth:0.2 to 36 oct, Frequency:20Hz to 20KHz, Gain: -24dB to +12dB, step:0.2 dB |
Delay: | 0ms to 115ms |
Display: | 2 x 20 LCD |
Store Settings: | 20 user program dynamic storage |
AMPLIFIER | |
Model | DA2504D |
Output Power | |
8Ω Stereo Power | 4×250W |
4Ω Stereo Power | 4×450W |
8Ω Bridged Monon Power | 2×800W |
Frequenty Response | 20Hz-20kHz ±0.5dB |
THD+N(Rated power,4Ω/KHz)% | 0.10% |
Signal Noise Ration(dB) | 110dB |
Input Impedance | 20KΩ Balanced / 10kΩ Unbalanced |
Output Connectors | Speakon Connectors(NEUTRIK) |
Power Requirement | 100-120V-50-60Hz or 200-240V-50-60Hz |
Dimension | 483×44×325mm |
Net weight | 5.7kg |
Overview:
DA2504D 1800W 1U power amplifier a new generation of Sanway DSP power amplifier. It integrated with compact class d design circuit, high efficiency cooling system and 4in&4out digital processor.
Delivering 4x450W at 4 ohms, DA2504D class d amplifier cover reliable power and performance up into 1U. Inside of the compact case, DSP equipment engine equipped with crossover, parametric EQ filters, limiting and alignment delay, it eliminates the need for outboard loudspeaker processors. And 20 factory preset configurations enable user can modify and store the presets conveniently.
Features:
4x250W at 8 ohms; 4x450W at 4 ohms
Digital, class d amplification
High efficiency and compact and lightweight
Fans cooling and output protection
Application:
Home theater
Permanent installations
Portable corporate AV systems
Live PA setups
Specification:
DSP | |
MODEL: | DA2504D |
Input: | 4 channel |
Output: | 4 channel |
PC Com Port: | 1 USB Com Port on front panel, 1 USB Com Port,2 RS485 Com Port on back panel (RJ-45) |
Processor: | 48KHz Sampling frequency, 48-bit Fixed-Point DSP, 24-bit A/D and D/A converter |
Dynamic range: | >110dB |
Frequency Response: | ±0.25dB, 20Hz --- 20KHz |
Distortion: | < 0.01%, 20Hz - 20KHz @ +10dBu balanced input |
Signal to noise ratio: | >110dB |
crossover filter: | Each output channel can be independently set as LPF and HPF The parameters can be adjusted, Filter type:Butterworth, Bessel, Linkwitz-Riley; The Crossover Frequency:20Hz---20KHz, Slope:12,18,24 or 48 dB/octave |
EQ: | Bandwidth:0.2 to 36 oct, Frequency:20Hz to 20KHz, Gain: -24dB to +12dB, step:0.2 dB |
Delay: | 0ms to 115ms |
Display: | 2 x 20 LCD |
Store Settings: | 20 user program dynamic storage |
AMPLIFIER | |
Model | DA2504D |
Output Power | |
8Ω Stereo Power | 4×250W |
4Ω Stereo Power | 4×450W |
8Ω Bridged Monon Power | 2×800W |
Frequenty Response | 20Hz-20kHz ±0.5dB |
THD+N(Rated power,4Ω/KHz)% | 0.10% |
Signal Noise Ration(dB) | 110dB |
Input Impedance | 20KΩ Balanced / 10kΩ Unbalanced |
Output Connectors | Speakon Connectors(NEUTRIK) |
Power Requirement | 100-120V-50-60Hz or 200-240V-50-60Hz |
Dimension | 483×44×325mm |
Net weight | 5.7kg |
+86 13826042826
: +86 13826042826
: sanway.audio
: sales@china-sanway.com
Copyright 2020 Sanway Professional Audio Equipment Co., Ltd All rights reserved. Supported by Leadong