Description
The DSP-10KQ is the first DSP amplifier of Sanway Audio. Throught 5 years research and development, we have finallly launched it in 2016. It seamlessly integrates networked digital signal distribution, drive processing, power amplification, and load verification plus performance monitoring in a single hardware unit with unified software controller. Power affords significant benefits when compared to conventional approaches utilizing separate components.
Features
1. 2500 W per channel @ 2 ohms
2. 2200 W per channel @ 4 ohms
3. 2U chassis weighing only 13kg
4. Class TD output stage
5. Regulated Switch Mode Power Supply
6. Full suite of protection and fault monitoring features
Specification
| DSP | |
| MODEL: | DSP10KQ |
| Input: | 4 channel |
| Output: | 4 channel |
| PC Com Port: | 1 USB Com Port on front panel, 1 USB Com Port,2 RS485 Com Port on back panel (RJ-45) |
| Processor: | 48KHz Sampling frequency, 48-bit Fixed-Point DSP, 24-bit A/D and D/A converter |
| Dynamic range: | >110dB |
| Frequency Response: | ±0.25dB, 20Hz --- 20KHz |
| Distortion: | < 0.01%, 20Hz - 20KHz @ +10dBu balanced input |
| Signal to noise ratio: | >110dB |
| crossover filter: | Each output channel can be independently set as LPF and HPF and APF, The parameters can be adjusted, Filter type:Butterworth, Bessel, Linkwitz-Riley; The Crossover Frequency:20Hz---20KHz, Slope:12,18,24 or 48 dB/octave |
| EQ: | Bandwidth:0.2 to 36 oct, Frequency:20Hz to 20KHz, Gain: -24dB to +12dB, step:0.2 dB |
| Delay: | 0ms to 115ms |
| Display: | 2 x 20 LCD |
| Store Settings: | 20 user program dynamic storage |
| AMPLIFIER | |
| Model | DSP 10KQ |
| Output Power | |
| 8Ω Stereo Power | 4×1300W |
| 4Ω Stereo Power | 4×2200W |
| 2Ω Stereo Power | 4×2500W |
| 8Ω Bridged Monon Power | 2×4400W |
| 4Ω Bridged Monon Power | 2×5000W |
| Frequenty Response | 20Hz-20kHz ±0.5dB |
| THD+N(Rated power,4Ω/KHz)% | 0.10% |
| Signal Noise Ration(dB) | 110dB |
| Input Impedance | 20KΩ Balanced / 10kΩ Unbalanced |
| Output Connectors | Speakon Connectors(NEUTRIK) |
| Power Requirement | 100-120V-50-60Hz or 200-240V-50-60Hz |
| Dimension | |
| Airframe | 483×377×88mm |
Reviews
| FP10000Q and FP14000. Client from Germany | FP10000Q and FP4000. Client from the USA. | FP10000Q and F[14000. Client from Spain |
| D20K. Client from France | | D14 DSP power amplifier. Client from Mexico |
| D10Q DSP power amplifier. Client from Australia | D10Q DSP power amplifier. Client from Australia |
| FP10000Q. Client from the United Kingdom | FP14000. Client from the United States |
+86 13826042826
: +86 13826042826
: sanway.audio
: sales@china-sanway.com
Switching Power Amplifier Digital Power Amplifier Class-D Amplifier Transformer Amplifier Plate Amplifier Active Line Arry Passive Line Array Powered Column Speaker Professional Speaker Subwoofer Speaker Stage Monitor Periphery Equipment PA Wireless Microphone Audio Mixer PA Sound Accessories Speaker Driver
Copyright 2020 Sanway Professional Audio Equipment Co., Ltd All rights reserved. Supported by Leadong