D20KQ 4 Channel Class D Digital DSP Amplifier 16000W for Subwoofer

Overview:

D20KQ 4 channel class d amplifier is the innovative technology achievement of Sanway Audio. It integrated with reliable power supply, compact class-d design circuit and high efficiency and unique cooling system.

 

The D20KQ consists of 4in&4out digital processing with 20 factory preset configurations enable user can modify and store the presets conveniently.

The built- in DSP including a crossover, parametric EQ filters, limiting and alignment delay, it eliminates the need for outboard loudspeaker processors.

 

The D20KQ combines four channels of extremely powerful amplification with networking, 4in&4out digital processing, amplifiers, power supply and connected mains supply resulting in unique operational benefits.

 

Features:

1.4x2100W at 8 ohms, 4x4000W at 4 ohms.

2. innovated  high-efficiency  cooling system with special design for fast cooling

3. DSP function: Mute, Polarity, Gain, EQ, Xover, Limiter. 

4. Ethernet function (Wi-Fi):to control many D20KQ amplifiers with one computer 

5. Super power; compact circuit inside, high efficiency and lightweight

 

Specification:

DSP
MODEL:	D20KQ
Input:	4 channel
Output:	4 channel
PC Com Port:	1 USB Com Port on front   panel, 1 USB Com Port,2 RS485 Com Port on back panel (RJ-45)
Processor:	48KHz Sampling frequency,   48-bit Fixed-Point DSP, 24-bit A/D and D/A converter
Dynamic range:	>110dB
Frequency Response:	±0.25dB,  20Hz ---   20KHz
Distortion:	< 0.01%, 20Hz - 20KHz @   +10dBu balanced input
Signal to noise ratio:	>110dB
crossover filter:	Each output channel can be independently set as LPF and HPF and APF, The   parameters can be adjusted,   Filter type:Butterworth, Bessel,   Linkwitz-Riley;   The Crossover Frequency:20Hz---20KHz,     Slope:12,18,24 or 48 dB/octave
EQ:	Bandwidth:0.2 to 36 oct,    Frequency:20Hz to 20KHz, Gain: -24dB to +12dB, step:0.2 dB
Delay:	0ms to 115ms
Display:	2 x 20 LCD
Store Settings:	20 user program dynamic   storage
AMPLIFIER
Model	D20KQ
Output Power
8Ω Stereo Power	4×2100W
4Ω Stereo Power	4×4000W
8Ω Bridged Monon Power	2×10000W
Frequenty Response	20Hz-20kHz  ±0.5dB
THD+N(Rated   power,4Ω/KHz)%	0.10%
Signal Noise   Ration(dB)	110dB
Input Impedance	20KΩ Balanced / 10kΩ   Unbalanced
Output Connectors	Speakon Connectors(NEUTRIK)
Power Requirement	100-120V-50-60Hz    or  200-240V-50-60Hz
Dimension	483×377×88mm
Net weight	13kg

 

D20KQ DSP interface:

The power rating testing of D20KQ：

amplifier output voltage is 131V

The operating voltage testing of 220V version D20KQ

The operating voltage range is 155V-265V

D20KQ DSP software_V2.2.5_APF_20180508.exe

D20KQ 4CH DSP Amplifier User Manual.pdf