specification | |
Total Harmonic Distortion | Less than 0.1 % (THD+N) 20 Hz - 20 kHz @ +14 dBu (ST OUT) |
Frequency Response | 0, +1, -3 dB 20 Hz - 20 kHz @ +4 dBu (ST OUT) |
Hum & Noise | -128 dBu Equivalent Input Noise/ -100 dBu Residual Output Noise 20 Hz - 20 kHz, Rs = 150 Ω , Input Gain = Maximum |
Input Connectors | MIC: 4, LINE: 2 mono + 4 stereo, CH INSERT: 2; RETURN: 1 stereo, 2TR IN: 1 stereo |
Output Connectors | EFFECT SEND: 1, CH INSERT: 2, REC: 1 stereo, MONITOR: 1 stereo, Phone: 1 |
Crosstalk | -70 dB @ 1 kHz |
Phantom Power | + 48 V |
Input HPF | CH 1-2 and CH 3/4-5/6, 80Hz, 12dB/oct |
CH EQ (MONO) ± 15 dB (Max. )High | 10 k Hz: shelving |
CH EQ (MONO) ± 15 dB (Max. )Mid | 2.5 k Hz: peaking |
CH EQ (MONO) ± 15 dB (Max. )Low | 100 Hz: shelving |
CH EQ (STEREO) ± 15 dB (Max. )High | 10 k Hz: shelving |
CH EQ (STEREO) ± 15 dB (Max. )Mid | _ |
CH EQ (STEREO) ± 15 dB (Max. )Low | 100 Hz: shelving |
Compressor (COMP) | Control x 1 (Gain/Threshold/Ratio), CH 1-2 |
Internal Digital Effect | 16 PROGRAM, PARAMETER control Foot Switch (Digital Effect, on/off) |
LED Level Meter / Pre Monitor Level | 2 x 7 points LED meter (PEAK, +6, +3, 0, -5, -10, -20 dB) PEAK lights if the signal comes within 3 dB of the clipping level. |
Peak Indicators | Red LED turns on when post EQ (ST CH: or post Mic HA) signal reaches -3dB below clipping (17dBu). |
Power Supply Adapter | PA-10: AC 38VCT, 0.62A, Cable Length = 3.6m |
Power Consumption | 21 W |
Dimensions (W x H x D) | 256.6 mm x 62.2 mm x 302.5 mm |
Net Weight | 1.6 kg |
+86 13826042826
: +86 13826042826
: sanway.audio
: sales@china-sanway.com
Switching Power Amplifier Digital Power Amplifier Class-D Amplifier Transformer Amplifier Plate Amplifier Active Line Arry Passive Line Array Powered Column Speaker Professional Speaker Subwoofer Speaker Stage Monitor Periphery Equipment PA Wireless Microphone Audio Mixer PA Sound Accessories Speaker Driver
Copyright 2020 Sanway Professional Audio Equipment Co., Ltd All rights reserved. Supported by Leadong