DP4080 Digital Professional Speaker Processor
Description
This product is a 1 u rack type programmed 4 input / 8 output 24-bit digital audio processor. The programming is operated through the front panel and a 2 x 20 characters display, with a very intuitive and a user-friendly interface. The Pc system software can be used via a PC platform. This product is more than a frequency divider. It can also provide signal distribution , gain control , balance, decay. The bandwidth is from 0.05 oct to 3.0 oct.
Features
1 . 4 channels signal input , 8 channels signal output
2 . 96KHZ sampling frequency
3 . 24 bits high performance analog-digital converter, the fastest 32 bit floating point computing chip is adopted
4 . Each input channel is equipped with six parametric equalizer, each output channel is equipped with six parametric equalizer, +15 db gain and -30db decay. The bandwidth is from 0.05 oct to 3.0 oct.
5 . Each input and output channel is with mute function editing button.
6 . Delay time can be adjusted using milliseconds as the unit of time , from 0 to 1000 ms, convenient calculation.
7 . 30 programmes can be stored
8 . Password can be set to protect the program
9 . Compression function is provided . You can adjust starting attack and release times independently.
10 .2 lines of 20characters LCD display.
11 . Output channel can be freely chosen , there are A, B, C four patterns of output. Each output is with +15db and -30db gain.
12 . Each channel is with phase selection, namely the positive and negative phase.
13 . Many kinds of high and low pass filter and the slope can be chosen from.
Specification
| MODEL: | DP4080 4IN&8OUT Digital Speaker Processor |
| Input: | 4 channel, 10K ohms balance |
| Output: | 8 channel, 600 ohms balance |
| PC Com Port: | 1 USB Com Port on front panel, 2 RS485 Com Port on back panel (RJ-45) |
| Processor: | 96KHz Sampling frequency, 32-bit Floating-Point DSP, 24-bit A/D and D/A converter |
| Dynamic range: | >108dB |
| Frequency Response: | ±0.25dB, 15Hz --- 20KHz |
| Distortion: | < 0.01%, 20Hz - 20KHz @ +10dBu balanced input |
| Signal to noise ratio: | >110dB |
| crossover filter: | Each output channel can be independently set as LPF and HPF, The parameters canbe adjusted, Filter type:Butterworth, Bessel, Linkwitz Riley; The Crossover Frequency:20Hz---20KHz, Slope:12,18,24 or 48 db/octave |
| EQ: | Bandwidth:0.016 to 4.0 oct, Frequency:20Hz to 20KHz, Gain: -30dB to +15dB, step:0.1 dB |
| Delay: | 0ms to 1000ms |
| Gain: | -40dB to +12dB |
| Display: | 2 x 20 LCD |
| Store Settings: | 30 user program dynamic storage |
| Size (H x W x D) : | 45 mm x 483 mm x 288 mm |
| Power supply: | 50/60 Hz, 90 - 240V/AC |
| Power consumption: | < 22 W |
| Net Weight(kg) | 3.3kg |
| Gross Weight(kg) | 4.6kg |
+86 13826042826
: +86 13826042826
: sanway.audio
: sales@china-sanway.com
Switching Power Amplifier Digital Power Amplifier Class-D Amplifier Transformer Amplifier Plate Amplifier Active Line Arry Passive Line Array Powered Column Speaker Professional Speaker Subwoofer Speaker Stage Monitor Periphery Equipment PA Wireless Microphone Audio Mixer PA Sound Accessories Speaker Driver
Copyright 2020 Sanway Professional Audio Equipment Co., Ltd All rights reserved. Supported by Leadong