D3 1800W+900W+900W Class D 3CH DSP Amplifier Module for Active Speaker

 

Key Feature
 
1>. D3 powered speaker module consists of class D amplifier board; switching power supply and DSP module.
2>. It is 1800W+900W+900W at 4 ohms 3 channels module
3>. This module is mounted an agile DSP module for versatile PA Systems Performance, you could manage this PA system via PC which connected with a USB or RS-485 cable.
4>. Compact installation dimension with powerful output
5>. D3 is perfect for three way line array speaker or one touring sound reinforcement system consists of one subwoofer and two bi-amped top speaker.

 

Specification
 

ITEM	D3
8Ω  Power	L:1500W + M:500W + H:500W
4Ω  Power	L:1800W + M:900W + H:900W
Frequency Response	20Hz-20KHz ±1dB
THD+N 1KHz 1W 8Ω	<0.1%
Signal to Noise Ratio  1KHz	>100dB
Channel Separation  1KHz	>80dB
Class	D
Protection	Short,DCP,OVP,UVP,OCP,OTP
Operating Voltage	110V Version:90V-135V / 220V Version 180V-265V
Input Sensitivity	1V
Input Impedance	20KΩ
DSP Fuction	MUTE,Polarity,Gain,Delay, Limiter,Mixer,EQ,XOver
DSP Control	USB and RS-485
Dimensions(W×H×D)	312×190×120mm
Packing Dimension	350×210×150mm
Net Weight(kg)	4.9
Gross Weight(kg)	5.9

FAQ:

Q: Is the power cables included with this line of products?

A: Each of our plate amplifier works with an power supply cable and internet cable which are provided.

Q: Can I use this for  2 top speakers ( 350W for each) and a subwoofer (1500W ohms)

A:The D3 plate amplifier have 3 channel (1500W+500W+500W at 8ohms), You could mount the D3 in the subwoofer, one 1500W channel power the sub, and other 500W channel to power the 2 units top speakers.

Q: Where Can I download the DSP software?

A: Please download the DSP software "D series plate module DSP software " 

 

DSP software

D3 series

D1 series

D2L series

D2S series

D2S series

D2S series

D3 series

D3 series

D3 series

D1 series

D3-user-manual.pdf

D3 amplifier module with APF  F2311_V1.0.5_20180525.exe