English  |
| Quantity: | |
|---|---|
fp6400
Sanway
can run from 65V to135V voltage range
can run from 135V to 265V voltage range
pure copper
stable on 2.67 ohms load
70CMF
13kg
TD
483x88x347mm
Descrption
We use large current rectifier bridge to ensure the unobstructed supply current. Using independent shielding way in the high-voltage power part, able to reduce the interference to audio signal to the lowest level, and ensure the higher safety for electricity.
We use high performance audion; make the system can bear larger current, with better dynamic and safety. Each audion has to be checked strictly, ensure the consistency of amplifier and minimum distortion.
We use the way of mainboard power-supply for the process the audio signal, able to make the voltage more stable, clear and thick, and sounds much better. Reasonable wiring can reduce the interference between channels and input-output.
Features
A. Very high power and channel density
B. Four-channel flexibility
C. Patented Class TD amplifier topology
D. Regulated Switch Mode Power Supply
E . Efficient cooling system
F. Adjustable parameters
G. Comprehensive protection and warning
H. XLR input connectors
I. Heavy-duty binding post or Speakon output connectors
Applications
1. Churches, Museums, Sports venues, Conference centres,
2. Theatres, Auditoria, Shopping malls, Transport terminals,
3. Concert halls, Bars, Restaurants, Lecture theatres
Specifications
| ITEM | FP6400 |
| Output Power | 20-34KHz,1W with 1KHz |
| 8Ω Stereo Power(RMS) | 1300W ×2 |
| 4Ω Stereo Power(RMS) | 2300W ×2 |
| 2Ω Stereo Power(RMS) | 2900W ×2 |
| 8Ω Bridged Power(RMS) | 4600W |
| 4Ω Bridged Power(RMS) | 5800W |
| Frequency Response(+0/-0.3dB, 1W/8Ω) | 20Hz-20KHz ±0.5dB |
| THD+N | 10KHz <0.05% |
| Signal-to-Noise Ratio | <-110dB |
| | 20V/uS |
| Input Connectors (per channel) | Female XLR(PIN+2, Configurable for pin 3+). TRS(tip+) |
| Output Connectors (per channel) | 5-way binging posts or Speakon connectors(market dependent) |
| Class | TD |
| TourClass Protection | turn-on/off transient, current inrush, sub/ultransonic input |
| Voltage Gain(dB) | 20,23,26,29,32,35,38,41, dB selectable |
| Cooling | 4 pcs variable speed DC fans , better than conventional cooling |
| Controls | Front-panel:2 attenuators, power switch, Rear panel, signal ground lift & mode switches |
| Dimensions(WXHXD) | 483×88×396mm |
| Packing dimension | 580×180×560mm |
| Net weight(kg) | 13 |
| Gross weight(kg) | 18 |
Descrption
We use large current rectifier bridge to ensure the unobstructed supply current. Using independent shielding way in the high-voltage power part, able to reduce the interference to audio signal to the lowest level, and ensure the higher safety for electricity.
We use high performance audion; make the system can bear larger current, with better dynamic and safety. Each audion has to be checked strictly, ensure the consistency of amplifier and minimum distortion.
We use the way of mainboard power-supply for the process the audio signal, able to make the voltage more stable, clear and thick, and sounds much better. Reasonable wiring can reduce the interference between channels and input-output.
Features
A. Very high power and channel density
B. Four-channel flexibility
C. Patented Class TD amplifier topology
D. Regulated Switch Mode Power Supply
E . Efficient cooling system
F. Adjustable parameters
G. Comprehensive protection and warning
H. XLR input connectors
I. Heavy-duty binding post or Speakon output connectors
Applications
1. Churches, Museums, Sports venues, Conference centres,
2. Theatres, Auditoria, Shopping malls, Transport terminals,
3. Concert halls, Bars, Restaurants, Lecture theatres
Specifications
| ITEM | FP6400 |
| Output Power | 20-34KHz,1W with 1KHz |
| 8Ω Stereo Power(RMS) | 1300W ×2 |
| 4Ω Stereo Power(RMS) | 2300W ×2 |
| 2Ω Stereo Power(RMS) | 2900W ×2 |
| 8Ω Bridged Power(RMS) | 4600W |
| 4Ω Bridged Power(RMS) | 5800W |
| Frequency Response(+0/-0.3dB, 1W/8Ω) | 20Hz-20KHz ±0.5dB |
| THD+N | 10KHz <0.05% |
| Signal-to-Noise Ratio | <-110dB |
| | 20V/uS |
| Input Connectors (per channel) | Female XLR(PIN+2, Configurable for pin 3+). TRS(tip+) |
| Output Connectors (per channel) | 5-way binging posts or Speakon connectors(market dependent) |
| Class | TD |
| TourClass Protection | turn-on/off transient, current inrush, sub/ultransonic input |
| Voltage Gain(dB) | 20,23,26,29,32,35,38,41, dB selectable |
| Cooling | 4 pcs variable speed DC fans , better than conventional cooling |
| Controls | Front-panel:2 attenuators, power switch, Rear panel, signal ground lift & mode switches |
| Dimensions(WXHXD) | 483×88×396mm |
| Packing dimension | 580×180×560mm |
| Net weight(kg) | 13 |
| Gross weight(kg) | 18 |
